Casio DT-X7 Series Quick Start Manual page 30

3. Pause the installation when the menu in Figure 5.3 is displayed; you have to install the driver at this
point.
Figure 5.3
4. Connect the USB cable to the PC and the other end to the USB Cradle and also the AC adaptor to the
USB Cradle.
5. Put the DT-X7 on the cradle and confirm that the green LED on the front of the cradle is lit. If not, be
sure the DT-X7 is positioned firmly on the cradle.
6. When the DT-X7 is mounted on the USB Cradle, a dialog is displayed to prompt you to install the
suitable driver. If you have not yet obtained the driver files, see page 23 for details of what you need
to download.
7. Choose No, not this time radio button in Figure 5.4 and then click Next > button.
Figure 5.4
30