Connection Via Bluetooth - Casio DT-X7 Series Quick Start Manual

5.4 Connection via Bluetooth

To establish communication between DT-X7 and PC via Bluetooth configuration, follow the steps, 1 to
4, below to set up a Bluetooth configuration on the DT-X7. Note that all the models of DT-X7 series
integrate the Bluetooth module.
1. Navigate to Start menu → Settings → Control Panel → Bluetooth Connection icon.
2. Click and hold the Serial Port Profile icon to display the context menu (see Figure 5.23), and
highlight Use to connect for ActiveSync in the menu. The icon changes to the
(ActiveSync). See Figure 5.24.
Figure 5.23
3. Double click the icon establishes connection via ActiveSync in Serial Port Profile. If Serial Port
Profile is not used, click and hold the icon, and then highlight Do not use for ActiveSync
connection.
4. Click the
screen, click the
Note:
When establishing connection with PC via ActiveSync, set a virtual COM port to the same COM port
number in the ActiveSync setting that uses Bluetooth Serial Port Profile.
Figure 5.24
icon in the Toolbar to close the communication. To close the Bluetooth connection
icon in the Toolbar.
41
icon