Connecting Power Supply To Ha-F60Io, Ha-F62Io; Ha-F60Io - Casio DT-X7 Series Quick Start Manual

4. Connecting Power Supply to HA-F60IO, HA-F62IO

4.1 HA-F60IO

Use the dedicated AC adaptor (AD-S42120B) for supplying power to the HA-F60IO USB Cradle.
Ensure that you connect the AC adaptor to the cradle before starting communication between the DT-X7
and PC via the cradle. Follow the steps below to connect the power supply to the DT-X7 using the
dedicated AC adaptor.
1. Plug the AC adaptor into the AC adaptor jack where "DCIN12V" is printed on the back of the cradle.
Figure 4.1
2. After connecting the power cable to the AC adaptor, plug in the plug to an electrical outlet.
Figure 4.2
3. Make sure the selector switch on the left side of the cradle is set to position "B" for USB client or
position A for USB host.
Figure 4.3
24