Casio DT-X7 Series Quick Start Manual page 43

3. Click Basic tab. Set each parameter in the tab by referring to the descriptions for the parameters
in Table 5.3 and Table 5.4.
Figure 5.26
Table 5.3
Parameter
SSID Enter the SSID of the network you want to connect to.
Security Disable None.
WEP Open in Authentication field.
WPA PSK in Authentication field (if selected, the Key field must be set also.)
WPA2 EAP-PEAP in Authentication field
(note) EAP-TLS in Authentication field
Key Enter 26 (maximum) alphanumeric digits (13 hex pairs) in the Key field if 128 bit
radio button is selected. Or, enter 10 (maximum) alphanumeric digits (5 hex pairs) in
the Key field if 64 bit radio button is selected.
The field displays the number of characters that have been entered.
***** in the field implies that the key has been extracted from the ini file. If ***** in
the field is edited, a new key has been deemed to be set. Or, if it has never been edited,
the key extracted from the ini file becomes effective as is.
Note:
WPA2 is available on DT-X7M10R2, M50R, M10R2-CN, M30R, and M30R-CN.
Description
43