Casio DT-X7 Series Quick Start Manual page 71

When using Visual Studio 2008 or Visual Studio 2005
Navigate to Debug menu → Start Debugging to start up the debugger.
1.
Figure 7.20
2. Similar to ordinary debugging operations with an actual DT-X7, the Device Emulator allows
break point setting (circled in red in Figure 7.20) in the source code and step-by-step debugging.
Figure 7.21
Note:
If the step-by-step debug process does not stop at any setting break point, install Microsoft .NET
Compact Framework 2.0 SP2 in the PC.
71