Figure 3-17: Chassis Support Screws - IEI Technology AFL-xxA-N26 User Manual

Align the mounting screws on the monitor rear panel with the mounting holes on
Step 7:
the bracket.
Carefully insert the screws through the holes and gently pull the monitor
Step 8:
downwards until the monitor rests securely in the slotted holes (Figure 3-17).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.

Figure 3-17: Chassis Support Screws

Secure the panel PC by fastening the retention screw of the wall-mounting
Step 9:
bracket. (Figure 3-18).
Page 50
AFL-xxA-N26 Series Panel PC