Step 2: Configuring The Hardware For Ethernet Connections; Step 3: The Connection Wizard - Nikon UT-1 User Manual

Step 2: Configuring the Hardware for
Ethernet Connections
Configure the UT-1 for use with Ethernet networks.
1
Display the hardware list.
In the setup menu, select Network, then
highlight Choose hardware and press 2
to view the hardware list.
2
Select Wired LAN.
Highlight Wired LAN and press J to
select the highlighted option and return
to the network menu.

Step 3: The Connection Wizard

Follow the on-screen instructions to create a network profile.
1
Display network profiles.
In the network menu, highlight Network
settings and press 2 to display the
profiles list and other network settings.
2
Select Create profile.
Highlight Create profile and press 2.
Note that if the list already contains nine
profiles, you will need to delete an
existing profile using the O (Q) button
before proceeding (083).
60
FTP