Table of Contents
Advertisement
4
Choose an adapter.
Choose an adapter from the pull-down menu and click Next. If
Image transfer or Camera control is selected, the Wireless
Transmitter Utility will automatically pair the camera and
computer.
5
Disconnect the camera.
The camera will display the message
shown at right when the process is
complete. After disconnecting the USB
cable from the computer and connecting
it to the UT-1, exit the Wireless
Transmitter Utility.
The camera will display the options
shown at right; choose an option to exit
the wizard.
D
Ad Hoc Mode
The camera will not automatically connect in ad hoc mode. Choose the
network profile on the computer before connecting.
92
Appendices
Advertisement
Table of Contents
