2
Start the Wireless Transmitter Utility.
When prompted, start the copy of the
Wireless Transmitter Utility installed on
the computer. Pairing will begin
automatically.
3
Disconnect the camera.
The message at right will be displayed
when pairing is complete. Disconnect the
USB cable from the computer and
connect the UT-1.
4
Exit the wizard.
Highlight one of the following options
and press J.
• Connect and exit wizard: Save the new
network profile and connect to the
server.
• Exit wizard: Save the new network profile and exit.
Proceed to "Image Transfer" (035) or "Camera Control" (040).
22
Transfer, Control, and HTTP