Nikon UT-1 User Manual page 83

3
Choose your next step.
The message at right is displayed when a
connection is established. Proceed to
page 72.
❚❚ Push-Button WPS
Choose Push-button WPS in Step 6 on page
67 if the wireless LAN access point uses push-
button WPS.
1
Press the WPS button on the wireless LAN
access point.
For more information, see the
documentation provided with the
wireless LAN access point.
2
Press J button on the camera.
The camera will connect to the access
point automatically.
3
Choose your next step.
The message at right is displayed when a
connection is established. Proceed to
page 72.
69
FTP