Camera Control - Nikon UT-1 User Manual

Camera Control

Select this option to control the camera from a computer running
Camera Control Pro 2 (available separately) and save photographs
directly to the computer hard disk instead of the camera memory
card (movies will still be saved to the camera memory card; insert a
memory card before shooting movies). Note that the camera
exposure meters do not turn off when the camera is in camera
control mode.
1
Display network profiles.
In the setup menu, select Network >
Network settings to display the profiles
list. Camera control profiles are indicated
by a L icon. Highlight a profile and
press 2 to select the highlighted profile
and return to the network menu.
The profile name will be displayed in
green when a connection is established.
2
Start Camera Control Pro 2.
Start the copy of Camera Control Pro 2 (available separately)
installed on the host computer. For information on using
Camera Control Pro 2, see the Camera Control Pro 2 manual
(pdf ).
A
Ethernet Networks
Do not disconnect the Ethernet cable while the camera is on.
40
Transfer, Control, and HTTP