Table of Contents
Advertisement
A
Network Status
The status of the link between the host and the UT-1 is shown by the
status LEDs and by the display in the top level of the network menu.
The Status LEDs
The POWER LED lights when the UT-1 is on. Signal
quality is shown by the LINK LED: the faster the LED
flashes, the better the signal and the faster data
can be transmitted. The ERROR LED flashes to show
that an error has occurred.
UT-1 off
USB cable not connected
Connecting to host
Waiting to send or sending data
Connection error
UT-1 hardware or battery malfunction
The Status Display
Network status can be viewed in the top level of the network menu.
Battery level: A five-
level display
showing the charge
state of the battery
in the UT-1.
Status
ERROR
I (off )
I (off )
I (off )
I (off )
H (flashes)
H (flashes) H (flashes) H (flashes)
Status area: The status of the connection
to the host. The camera URL is
displayed in green when a connection
is established. Errors are also displayed
here (0112).
Signal strength: Wireless signal strength.
Ethernet connections are shown by d.
Transfer, Control, and HTTP
LINK
POWER
I (off )
I (off )
I (off )
K (on)
K (on)
K (on)
H (flashes)
K (on)
I (off )
K (on)
47
Advertisement
Table of Contents
