Step 1: Connecting The Equipment - Nikon UT-1 User Manual

Step 1: Connecting the Equipment

Before proceeding with the following steps, start the computer
and log in.
1
Insert a memory card.
Turn the camera off and insert a memory card (do not turn the
camera off or disconnect the Ethernet cable while data are
being transferred to the computer). This step can be omitted
in camera control mode (040).
2
Open the UT-1 USB connector cover and
connect the USB cable from the UT-1 to
the camera USB connector (for more
information on connecting USB cables to
the camera, see the camera manual).
3
Connect an Ethernet cable.
Connect the Ethernet cable as shown below. Do not use force
or insert the connectors at an angle.
16
Transfer, Control, and HTTP