Step 1: Connecting The Equipment - Nikon UT-1 User Manual

Step 1: Connecting the Equipment

After starting the computer and logging in, ready the camera and
WT-5 as described below.
1
Insert a memory card.
Turn the camera off and insert a memory card (do not turn the
camera off while data are being transferred to the computer).
This step can be omitted in camera control mode (07).
2
Open the UT-1 USB connector cover and
connect the USB cable from the UT-1 to
the camera USB connector (for more
information on connecting USB cables to
the camera, see the camera manual).
3
Attach the WT-5 (06).
4
Turn the camera on.
Rotate the power switch to turn the camera on.
5
Press the power switch for about a
second to turn on the UT-1.
Power switch
65
FTP