2
Obtain or select an IP address.
Highlight one of the following options
and press 2.
• Obtain automatically: Select this option if
the network is configured to supply the
IP address automatically.
• Enter manually: When prompted, enter an IP address and
subnet mask by pressing 4 and 2 to highlight segments
and 1 and 3 to change. Press J to proceed when entry is
complete.
3
Confirm the IP address.
The camera IP address will be displayed
as shown at right; press J. If Image
transfer or Camera control is selected,
disconnect the USB cable from the UT-1
and proceed to Step 4; otherwise, proceed to Step 7.
4
Connect the camera to the computer.
When prompted, connect the camera to
the computer using the USB cable
supplied with the camera.
Transfer, Control, and HTTP
33