Step 4: Network Settings - Nikon UT-1 User Manual

Step 4: Network Settings

Follow the steps below to connect to the ftp server.
1
Obtain or select an IP address.
Highlight one of the following options
and press 2.
• Obtain automatically: Select this option if
the network is configured to supply the
IP address automatically. The camera will display the IP
address provided by the network; J to proceed.
• Enter manually: When prompted, enter an IP address and
subnet mask by pressing 4 and 2 to highlight segments
and 1 and 3 to change. Press J when entry is complete.
The camera will display the selected IP address; press J to
proceed.
2
Choose the server type.
Highlight FTP or SFTP (secure ftp) and
press 2.
3
Enter the IP address.
Enter the server URL or IP address and
press J to connect.
72
FTP