Nikon UT-1 User Manual page 55

D
Wireless Networks
Operations may take longer on wireless networks. If the signal is disrupted
while pictures are being transferred to Camera Control Pro 2, the LED on
the WT-5 will flash yellow; turn the camera off and then on again. Transfer
will resume when the connection is re-established. Note that transfer can
not be resumed if you turn the camera off again before transfer is
complete.
A
Network Status
The status of the link between the host and the UT-1 is shown by the
status LEDs and by the display in the top level of the network menu.
The Status LEDs
The POWER LED lights when the UT-1 is on. Signal
quality is shown by the LINK LED: the faster the LED
flashes, the better the signal and the faster data
can be transmitted. The ERROR LED flashes to show
that an error has occurred.
UT-1 off
USB cable not connected
Connecting to host
Waiting to send or sending data
Connection error
UT-1 hardware or battery malfunction
Status ERROR LINK
I (off ) I (off )
I (off ) I (off )
I (off ) K (on)
I (off ) H (flashes)
H (flashes) I (off )
H (flashes) H (flashes) H (flashes)
Transfer, Control, and HTTP
POWER
I (off )
K (on)
K (on)
K (on)
K (on)
41