Power Supply Converter Leds - Cisco Catalyst 6807-XL Hardware Installation Manual

LEDs
LED
FAULT
4 The system On/ Off switch turns the power supply output on and off.
Related Topics
Removing and Installing Power Supplies, on page 50
Troubleshooting the Power Supply Module, on page 104
Power Supply Module, on page 5
Power Entry Module, on page 7

Power Supply Converter LEDs

The PSC includes a Status LED and an ID LED, as shown in the following figure. The different states of the
LEDs are described in the following tables.
Figure 4: Power Supply Converter LED Locations
1 Status
Table 5: PSC Status LED and Descriptions
LED Color
Green
Red
Table 6: ID LED and Description
LED Color
Blue
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
10
LED Color Meaning
Red Power supply module has malfunctioned
2 ID
Meaning
The A3.3V from the module is within normal range
The A3.3V from the module is not within normal
range
Meaning
Identifies the power supply converter module in the
chassis
Product Overview
OL-30656-01