Removing And Installing The Power Supply Converter; Installing The Power Supply Converter - Cisco Catalyst 6807-XL Hardware Installation Manual

Removing and Replacing FRUs
Warning

Removing and Installing the Power Supply Converter

This section describes how to remove and install PSCs.
Related Topics
Power Supply Converter, on page 7
Power Supply Converter LEDs, on page 10

Installing the Power Supply Converter

To install the PSC, perform these steps:
Before You Begin
• Ensure that the system (earth) ground connection has been made. For ground connection instructions,
• You may require a flat-blade or Number 2 Phillips-head screwdriver to tighten the screw on the PSC.
Procedure
Step 1
Remove the PSC from its packaging.
Step 2 Slide the PSC into the PSC bay. Ensure that the power supply is fully seated in the bay.
Step 3 Insert the mounting screw and tighten it to fully seat the connectors.
OL-30656-01
The fans might still be turning when you remove the fan assembly from the chassis. Keep fingers,
screwdrivers, and other objects away from the openings in the fan assembly's housing. Statement
263
see Establishing System Ground, on page 41
Removing and Installing the Power Supply Converter
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
57