Cisco Catalyst 6807-XL Hardware Installation Manual page 104

Cable Pinouts
Figure 43: Twisted-Pair Crossover 1000BASE-T Cable Schematic
The accessory kit contains the cable and adapters that you will need to connect a console (an ASCII terminal
or PC running terminal emulation software) or modem to the console port. The accessory kit includes these
items:
• RJ-45-to-RJ-45 rollover cable
• RJ-45-to-DB-9 female DTE adapter (labeled "Terminal")
Table 35: MTP-12 Fiber-Optic Cable Pinout
Side 1 Pin (Signal)
1 (Tx)
2 (Tx)
3 (Tx)
4 (Tx)
5 (Not used)
6 (Not used)
7 (Not used)
8 (Not used)
9 (Rx)
10 (Rx)
11 (Rx)
12 (Rx)
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
94
Transceivers, Module Connectors, and Cable Specifications
Side 2 Pin (Signal)
12 (Rx)
11 (Rx)
10 (Rx)
9 (Rx)
8 (Not used)
7 (Not used)
6 (Not used)
5 (Not used)
4 (Tx)
3 (Tx)
2 (Tx)
1 (Tx)
OL-30656-01