Installing The Switch; Installation Tasks - Cisco Catalyst 6807-XL Hardware Installation Manual

Installing the Switch

•
•
•
•
•
•
•
•
•
•
•

Installation Tasks

The process of installing the switch can be broken down into a series of tasks described in the following table:
Table 10: Installation Tasks
Task
Unpacking the switch
Installing the rack-mount shelf kit
Rack-mounting the chassis
OL-30656-01
Installation Tasks , page 29
Accessory Kit, page 31
Unpacking the Switch, page 32
L Brackets on the Chassis, page 33
Installing the Rack-Mount Shelf Kit, page 33
Rack-Mounting the Chassis, page 37
Establishing System Ground, page 41
Attaching an ESD Strap, page 43
Verifying the Switch Chassis Installation, page 45
Connecting the Supervisor Engine Console Port , page 46
Installing Transceivers and Module Connectors, page 47
C H A P T E R
Description
Remove the switch from the packaging material.
We recommend that you save the packaging material for use
Note
later if you have to move the chassis.
Install the rack-mount shelves before you install the chassis in the rack.
The shelf brackets help support the weight of the chassis.
Install the chassis in a standard 19-inch rack, either open or enclosed.
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
3
29