Power Supply Leds - Cisco Nexus 3600 Hardware Installation Manual

LEDs
Component
Fan

Power Supply LEDs

This table provides information about power supply LEDs for Cisco Nexus 3000 Series switches.
Component
Power supply
LED Status
Status Solid on
(green)
Off
Solid on
(amber)
Blinking
(amber)
LED Status
OK (green) Solid on
Blinking
Off
FAULT (amber) Solid on
Blinking
Off
Description
All diagnostics pass. The module is operational.
The module is not receiving power.
The module is booting or running diagnostics.
If the module fails during an initial reset, the LED continue
to blink and the module does not come online.
The module has a runtime failure and is brought offline.
Description
Power supply is on and okay.
3.3 voltage standby (VSB) is on but the power supply unit
not powering the other modules.
No power to the power supply.
Power supply failure, overvoltage, overcurrent, or overheatin
Power is present, 3.3 VSB on, and the power supply is off.
PSU fan rotor is not functioning normally.
Operating normally.
Cisco Nexus 3600 Hardware Installation Guide
Power Supply LEDs
51