Cisco Catalyst 6807-XL Hardware Installation Manual page 93

Transceivers, Module Connectors, and Cable Specifications
WDM
Transceiver
Type
DWDM
SFP
DWDM
SFP+
OL-30656-01
Description
The Cisco DWDM SFP is a
hot-swappable I/O transceiver
module that you can plug into
Gigabit Ethernet SFP ports or
slots. It supports the ITU
100-GHz wavelength grid and
matches the wavelength plan for
the Cisco 100-GHz ONS product
family. It is a fixed-wavelength
SFP, with 40 different SFP
models. It uses standard SFP
interface network: dual LC/PC
connector.
Only connections with
Note
patch cords having PC
or UPC connectors are
supported. Patch cords
having APC connectors
are not supported.
The Cisco DWDM SFP+
transceiver module is a
hot-swappable I/O device that
you can plug into an Ethernet
SFP+ port of a Cisco switch or
router to link the port with the
network. It supports 40
nontunable ITU 100-GHz
wavelengths. It also supports
digital optical monitoring
capability and the Cisco quality
identification (ID) feature, which
enables a Cisco switch or router
to identify whether or not the
module is an SFP+ module
certified and tested by Cisco.
Supported on These
Modules
• WS-X6724-SFP
• WS-X6748-SFP
• WS-X6848-SFP
• VS-S2T-10G
• VS-S2T-10G XL
You an use these 10-GB
modules with the Cisco
13
OneX Converter Module
• WS-X6816-10G
• WS-X6816-10G XL
• WS-X6908-10
• WS-X6908-10 XL
• VS-S2T-10G
• VS-S2T-10G XL
You can also use these
40-GB modules with the
Cisco FourX Converter
14
Module :
• WS-X6904-40G-2T
• WS-X6904-40G-2TXL
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
WDM Transceivers
More Information
Cisco Dense
Wavelength-Division
Multiplexing Small Form-Factor
Pluggable Module
• Cisco 10GBASE Dense
Wavelength-Division
Multiplexing SFP+
Modules Data Sheet
• Cisco OneX Converter
Module
• Cisco 40GBASE CFP
Modules Data Sheet
83