Automatic Transmission Gearshift; Gearshift Mechanism, Adjusting (Automatic Transmission) - BMW 1999-2005 M3 Service Manual

Gearshift Linkage
1 of 4
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/2...
Automatic Transmission
Gearshift
In E46 models, the electronic
immobilizer (EWS) prevents starter
operation unless the gear position is
Park or Neutral.
Gearshift mechanism,
adjusting (automatic
transmission)
Position gearshift lever in Park.
-
Raise vehicle to gain access to
-
shift linkage.
WARNING!
Make sure the car is stable and well
supported at all times. Use a
professional automotive lift or jack
stands designed for the purpose.
Loosen selector clamping nut (A).
Counterhold clamping bolt when
loosening nut.
- Push shift lever of transmission
forward toward engine (Park
position) while applying light
pressure on cable end. Tighten
cable clamping nut.
Note:
Do not overtighten the nut so that it
twists the cable .
Tightening torque
Shift cable
clamping nut
250-3
10 - 12 Nm
(7.5 - 9 ft-lb)
2/25/2009 10:19 PM