BMW 1999-2005 M3 Service Manual page 150

Engine Removal and Installation
13 of 16
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/1...
Remove power steering pump:
Remove steering pump pulley.
Remove front and rear pump
mounting bolts (arrows).
Hang pump from body using stiff
wire.
Remove A/C compressor mounting
bolts (arrows) and A/C compressor
from its mounting bracket without
disconnecting, distorting, or deforming
any refrigerant lines. Hang from body
using stiff wire.
Remove windshield and headlight
-
washer reservoir:
Remove bolt on top of reservoir.
Lift tank and disconnect electrical
connections to pump and to
washer fluid level sensor.
Disconnect hoses to windshield
washer and headlight washer. Tilt
reservoir to prevent fluid from
leaking out.
Remove secondary air pump:
Remove hose at one-way valve
(A).
Remove bolts at support bracket
on strut tower (arrows).
Disconnect electrical harness from
2/25/2009 9:36 PM