Fuel Injection
12 of 19
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/1...
Disconnect electrical harness
connectors (arrows) at oil pressure
sender and oil temperature sender at
base of oil filter housing.
Remove dipstick guide tube:
Disconnect wiring harness
brackets from tube (A).
Unclip fuel lines from tube (B).
Remove lower guide tube
mounting bolt (C). Pull out
dipstick guide tube.
If necessary, disconnect electrical
harness connector at fuel tank venting
valve (A). Disconnect hose at quick
disconnect fitting (arrow).
Remove throttle assembly
-
mounting screws at all corners
and pull assembly off manifold.
Installation is reverse of removal.
-
Replace sealing ring between
throttle assembly and intake
manifold.
2/25/2009 9:55 PM