Transmission Removal And Installation; Transmission, Removing And Installing - BMW 1999-2005 M3 Service Manual

Manual Transmission
1 of 6
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/2...
Transmission Removal
and Installation
Removal and installation of the
transmission is best accomplished on a
lift using a transmission jack. The
engine must be supported from above
using appropriate support equipment.
This allows the engine to pivot on its
mounts to access the upper Torx-head
bolts at the bellhousing.
WARNING!
Make sure the car is stable and
well supported at all times. Use
a professional automotive lift or
jack stands designed for the
purpose. A floor jack is not
adequate support.
The removal of the transmission
may upset the balance of the
vehicle on a lift.
Transmission, removing and
installing
Disconnect negative (-) cable from
-
battery.
CAUTION!
Prior to disconnecting the battery,
read the battery disconnection
cautions given at the front of this
manual on page viii.
Remove engine cooling intake hood
fasteners (arrows) at front of engine
compartment.
230-4
2/25/2009 10:17 PM