Digital Multimeter - BMW 1999-2005 M3 Service Manual

General
6 of 7
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/0...
repair procedures in this manual
include BMW-specified torque values in
Newton-meters (Nm) and the
equivalent values in foot-pounds (ft-lb).
Several types of torque wrenches are
available. An inexpensive beam-type
(top) is adequate but must be read
visually. A ratchet-type (bottom) can be
preset to indicate (click) when the
torque value has been reached. They
all do the same job, but offer different
convenience features at different
prices. The most convenient ones have
a built-in ratchet, and can be preset to
indicate when a specific torque value
has been reached. Follow the wrench
manufacturer's directions for use to
achieve the greatest accuracy.
A torque wrench with a range up to
about 150 Nm (185 ft-lb) has adequate
capacity for most of the repairs covered
in this manual. For recommended
torque values of 10 Nm or below, the
English system equivalent is given in
inch-pounds (in-lb). These small values
may be most easily reached using a
torque wrench calibrated in
inch-pounds. To convert inch-pounds
to foot-pounds, divide by 12.

Digital multimeter

Many of the electrical tests in this
manual call for the measurement of
resistance (ohms) or voltage values.
For safe and accurate tests of sensitive
electronic components and systems, a
multimeter or Digital Volt/Ohmmeter
(DVOM) with high input impedance (at
least 10,000 ohms) should be used.
Some meters have automotive
functions such as dwell and pulse
width that are useful for
troubleshooting ignition and fuel
injection problems.
2/25/2009 10:09 PM