BMW 1999-2005 M3 Service Manual page 144

Engine Removal and Installation
7 of 16
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/1...
pressure (approx. 3 - 5 bar or 45
- 75 psi) and may be expelled
under pressure. Do not smoke or
work near heaters or other fire
hazards. Keep a fire
extinguisher handy. Before
disconnecting fuel hoses, wrap
a cloth around fuel hoses to
absorb any leaking fuel. Catch
and dispose of escaped fuel.
Plug all open fuel lines.
Always unscrew the fuel tank
cap to release pressure in the
tank before working on the tank
or lines.
- Raise car and support in a safe
manner.
CAUTION!
Make sure the car is stable and well
supported at all times. Use a
professional automotive lift or jack
stands designed for the purpose. A
floor jack is not adequate support.
- Remove protective engine splash
guard.
Working beneath car (on left side
under driver seat), remove fuel filter
cover and clamp fuel hose(s).
Detach fuel hose(s) from fuel line(s)
(arrows) using special fuel line
removal tool 16 1 050 or equivalent.
Seal off fuel line(s) with BMW special
2/25/2009 9:36 PM