Brakes
2 of 11
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/3...
WARNING!
Make sure the car is firmly supported
on jack stands designed for the
purpose. Place the jack stands
beneath a structural chassis point.
Do not place jack stands under
suspension parts.
Front sensor: Unscrew mounting bolt
at steering arm (arrow).
Rear sensor: Remove sensor from its
bore (arrow) in the rear trailing arm.
Note:
ABS wheel speed sensor application
may vary depending on traction control
system installed.
Disconnect and remove impulse sensor
electrical harness (arrow) from
retaining mounts. (Left front wheel
shown).
During installation, apply thin coat
-
2/25/2009 10:35 PM