BMW 1999-2005 M3 Service Manual page 726

Brakes
11 of 11
Copyright © 2006 Robert Bentley, Inc. All rights reserved.
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/3...
output lines from pump.
Remove electrical harness
connector.
Lift pump to release from lower
mounting pad.
Slide pump out of retaining ring.
- Installation is reverse of removal,
noting the following:
Be sure to replace rubber pump
mounts if damaged or worn.
When installing vacuum hose and
battery cable at trim panel, make
sure isolating grommets are
securely seated.
Bleed brakes as described earlier.
2/25/2009 10:35 PM