Cv Joint Boots; Ball Cage Cv Joint Boot - BMW 1999-2005 M3 Service Manual

Rear Axle Final Drive
4 of 7
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/3...

CV joint boots

Note:
When replacing a CV joint boot, use
a complete CV joint boot repair kit.
The kit will include a new boot,
clamping bands, special lubricant,
and a new inner CV joint circlip. The
kit is available from an authorized
BMW dealer parts department.
The outer CV joint cannot be
removed from the axle shaft. In
order to replace the outer CV boot, it
is necessary to remove the inner
joint and boot first.
If the CV joints are worn or
defective, a complete rebuilt axle
shaft is available from an authorized
BMW dealer parts department.
Working with axle shaft at bench, cut off
old boot clamps and remove boots.
Clean old grease off joints and shafts.
Use new grease from CV joint boot kit.

Ball cage CV joint boot

Lift off dust cover from inner CV joint and
remove circlip (arrow) retaining joint
2/25/2009 10:32 PM