Clutch
8 of 8
Copyright © 2006 Robert Bentley, Inc. All rights reserved.
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/2...
Tightening torques
Transmission to engine (Torx bolts)
M8
M10
M12
Transmission pilot bearing,
replacing
Remove clutch as described earlier.
-
Remove transmission pilot bearing from
end of crankshaft using BMW special
tool 11 2 340 or equivalent puller.
Press new bearing into place using
BMW special tool 11 2 350 or equivalent
driver.
22 Nm (16 ft-lb)
43 Nm (32 ft-lb)
72 Nm (53 ft-lb)
2/25/2009 10:15 PM