Output Shaft Seal, Replacing (Transmission Installed) - BMW 1999-2005 M3 Service Manual

Manual Transmission
4 of 8
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/2...
Tightening torques
M10 (10.9 grade)
M12 (10.9 grade)
Transmission /
transfer case
crossmember to
chassis (M8)
Transfer case to
transmission (M10)
Output shaft seal, replacing
(transmission installed)
- Raise and safely support vehicle.
- Support transmission with
transmission jack.
On rear wheel drive cars:
Remove driveshaft. See
Driveshaft.
Remove transmission mount bolts
(A).
Remove transmission
crossmember bolts (B) and tilt
down rear of transmission.
On all wheel drive cars:
Remove front and rear driveshafts.
See 260 Driveshaft
Remove transfer case
crossmember bolts (arrows) and
remove transfer case. See
Transfer Case.
60 Nm (44 ft-lb)
100 Nm (74
ft-lb)
21 Nm (15 ft-lb)
41 Nm (30 ft-lb)
260
270
2/25/2009 10:17 PM