Engine Removal And Installation; Intake Manifold, Removing And Installing - BMW 1999-2005 M3 Service Manual

Engine Removal and Installation

1 of 16
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/1...
Engine Removal and
Installation
Be sure to cover all painted surfaces
before beginning the removal
procedure. As an aid to installation,
label all components, wires and hoses
before removing them. Do not reuse
gaskets, O-rings or seals during
reassembly.
WARNING!
Due to risk of personal injury, be
sure the engine is cold before
beginning the removal procedure.
- Remove engine hood or place
hood in service position. See
410 Fenders, Engine
Note:
It is not necessary to remove the engine
hood, but it is helpful and will make
engine removal and installation easier.
Intake manifold, removing and
installing
Note:
The intake manifold must be removed
to facilitate engine assembly removal.
Disconnect negative (-) battery
-
cable in luggage compartment.
CAUTION!
Prior to disconnecting the battery,
read the battery disconnection
cautions given at the front of this
manual on page viii.
110-2
Hood.
2/25/2009 9:36 PM