BMW 1999-2005 M3 Service Manual page 407

Clutch
2 of 8
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/2...
Remove transmission from engine.
-
See 230 Manual
- Remove release bearing from
transmission input shaft.
Remove clutch release lever by pulling
away from spring clip in direction of
arrow.
Lock flywheel in position using BMW
special tool 11 2 170 or equivalent.
Install BMW special tool 21 2 160 or 21
2 170 with feet (arrows) clamping on to
pressure plate at openings for
self-adjusting springs. Tighten down
head nut (A) to lock feet into position.
CAUTION!
Self adjusting clutch tool feet must
engage in the openings for adjusting
springs to safely remove the SAC
pressure plate.
Transmission.
2/25/2009 10:15 PM