Alcatel-Lucent OmniPCX Office Installation Manual page 67

1. Stop the Alcatel-Lucent OmniPCX Office Communication Server system, and remove the
power supply cord from the
Disconnect the power supply cable on the
the power supply. This operation disconnects the mains supply and the internal
battery.
Disconnect the mains inlet on the
the power supply. This process disconnects the mains and the internal battery.
2. Remove the metal panel at the rear.
3. Remove the cover from the hole provided for the connecting cable on the rear panel of the
Alcatel-Lucent OmniPCX Office Communication Server.
4. Remove the fan connector, then remove the power supply unit and the battery unit.
5. Replace the battery cable with the new cable provided with the connection kit (3EH 75031
AA).
6. If the BAT IN/EXT connector is present, remove the red jumper.
system platform side.
system
system
platform side before handling
platform side before manipulating
4-29