-
Plug in the handset cable (connector
4.11.1.3.2 Wall mounted
Preparing the terminal
-
Turn the terminal
-
Unscrew A and remove the metal plate.
-
Slide this plate up the lower groove and secure it with screw B.
-
Remove the handset hang-up lug by turning screw C through half a turn.
Mounting the terminal
-
Drill two hole respecting the dimensions given below.
-
Position the supporting screws as shown below.
-
Attach the terminal
4.11.1.3.3 Mounting optional modules:
) into the guide intended for this purpose.
4-87