Alcatel-Lucent OmniPCX Office Installation Manual page 43

SLI1/SLI2
AUX
CONFIG
MODULE1
ISDN T01
MODULE2
ISDN T02
AUDIO -IN
DOORPHONE
- LAN: 10/100 base T Ethernet port (MDI-II/straight)
CoCPU-2 and LAN
- SLI1/SLI2: Analog Z accesses from Mini-MIX board, General ringer; 12V output
- AUDIO-OUT
- CONFIG: RS232 for OMC.
- MODULE1: HSL
- ISDN T01: ISDN T01 port of Mini-MIX board
- MODULE2: HSL
- ISDN T02: ISDN T02 port of Mini-MIX board
- AUDIO
- DOORPHONE: Interfaces doorphone
Note 1:
The USB connector on the CPUe-1/CPUe-2 boards is not currently used.
4.2.1.1.1 CoCPU-1 and CoCPU-2 Boards
RJ45 pin
LAN
Up-Link
Unit 1 to 3 outputs
- LAN : 10/100 base T Ethernet port (MDI-II/straight).
- UNIT1, UNIT2, UNIT3: ports on integrated LAN switch (MDI-X/crossover).
- UPLINK : integrated LAN switch uplink port (MDI-II/straight).
4.2.1.1.2 SLI Board
Ground +12 V
Ground +12 V
CTS DSR
TX+ TX-
TX+ TX-
Audio In
Audio In A
B
.
AUX : Interfaces Loudspeaker alarm
1 link of HSL board
2 link of HSL board
-IN : Interfaces Please wait message
1 2 3
TX+ TX- RX+
TX+ TX- RX+
RX+ RX- TX+
CenRg
ZA1 ZB1
A
CenRg A
Ground
RX RMTRES Ground
RX+
TX+ RX+ RX-
RX+
TX+ RX+ RX-
Audio Audio Audio
Ctrl A Out A Out B
DoorPhB DoorPhA DoorPhA
1 1
for connection to
for connection to
, Background music
4 5
CenRG
ZA2
B
CenRG
B
TX DTR
RX-
TX-
RX-
TX-
Audio
Alarm A
Ctrl B
DoorPhB
2 2
, for connections between CoCPU-1,
General ringer; 12V output
add-on module expansion
add-on module expansion
, Loudspeaker, Alarm
6 7
RX-
RX-
TX-
ZB2
RTS
Alarm B
1
2
8
4-5