Alcatel-Lucent OmniPCX Office Installation Manual page 128

Chapter
4
modules.
Note:
It is possible to replace a Reflexes set with an Alcatel-Lucent 9 series set. It is not possible to replace an
Alcatel-Lucent 9 series set with a Reflexes set.
4.12.1.1.2 IP Touch set replacement
You can replace your IP Touch terminal by connecting a terminal of the same family only, into
your phone socket. This substitution can be temporary or permanent.
Temporary substitution
The default configuration is not preserved when replacing temporarily an IP Touch set by
another type of IP Touch set. The activation code and the replacement functions will be
refused.
The data downloading process is automatically activated and the correct files are selected.
Permanent replacement
The default configuration is not preserved when replacing permanently an IP Touch set by
another type of IP Touch set. The activation code and the replacement functions will be
refused.
The data downloading process is automatically activated and the correct files are selected.
4.12.1.1.3 Moving a handset
If you move office, you can move your set from one socket to another and still preserve all or
part of its settings.
Before relocating the set:
- You need to change the personal code, which must be different from the default code.
- It is advisable to lock the set.
Relocating a set to an unused socket
4.12.1.1.4 Adding sets
When adding sets, attention must be paid to the limits on the number of sets and the features
offered by the system software key.
4-90