Alcatel-Lucent OmniPCX Office Installation Manual page 49

The ISDN-EFM box must be installed as close as possible to the system (3 m maximum). All
the box connections are made with straight RJ45-RJ45 cables.
Output connector functions:
- BRA: connection of T0 access to be forwarded.
- NT: Connection of ISDN network termination.
- S0: connection of forwarding S0 station.
- CPU: connection of the AUD
board.
- AUX: connection of Audio out, Alarm, General bell and 12 V use auxiliaries
a copy of the CPU/CPUe board's AUX1, see sheet "CPU/CPUe boards" for connection
recommendations
OUT IO and AUX
.
connector s of the CPU PowerCPU
; since AUX is
4-11