Alcatel-Lucent OmniPCX Office Installation Manual page 164

Chapter
6
If no DDI number is available, check whether the system's ISDN modem access is in the
default attendant group (default group). In this case it is not necessary to keep a DDI number.
Remark:
If the modem is not currently in the attendant group, it is useful to set the Reroutdata flag to the value
01H. The system then automatically recognizes the ISDN service corresponding to the incoming call and
looks in the default attendant group for a data terminal.
6.2.3.3.2 Remote Access By The Analog Modem
Analog Modem (recommended)
Alcatel-Lucent OmniPCX Office Communication Server is equipped with an analog modem
V34 for remote access through the public network. This modem provides a point-to-point
communication link accessible via standard LINUX protocols (PPP, etc.).
Its main characteristics are:
- V34 Modem
- Maximum transmission speed: 33600 bds
- Hayes protocol
In the current version of the system, the V34 "US Robotic" modem has been validated. The
other types of modems were not validated.
Installation Process of the Remote Access by Analog Modem
Follow the procedures described in the previous paragraphs, but replace the FRITZ modem
with the US Robotics analog modem.
Remote Access to the Analog Modem
When the analog modem is used, it is necessary to hold a DDI number in the public numbering
plan in order to be able to carry out remote maintenance.
In the case of no DDI number is available, the access to the modem will be possible only via
the operator transfer.
6.2.3.3.3 Operating Mode
1. Open OMC on the remote access PC.
2. Select the Expert menu.
3. Click Comm.
4. Select Connect. The Communication Path window is displayed.
5. Click Modem direct, then OK.
6. There are two ways of establishing a remote connection:
• Select a modem phone book entry in the Used Entry field of the Modem Connection
window.
• Click Dialing, select the modem to use ("used modem"), then dial the customer remote
access number in the Number field.
7. Enter the system's default password pbxk1064. It will take a few seconds for the
connection to be established.
6-14