Alcatel-Lucent OmniPCX Office Installation Manual page 61

system platform . These two phases of installation are presented separately below.
You will have to choose the appropriate preparation procedure, according to whether you have
a rack or stack version of the external battery unit.
The connection procedure is the same for
Server M OmniPCX Office RCE Medium
platforms , but is different for
Preparing an External Battery Unit (Rack Version)
Before starting the installation, note that:
- External batteries must be of the same type, must be supplied by the same manufacturer
and be from the same batch run.
- Batteries must be charged prior to installation.
Figure 4.24: Wiring Diagram of a 12V External Battery Rack Unit (2 or 3x7Ah in parallel)
Alcatel-Lucent OmniPCX Office Communication
and L
S OmniPCX Office RCE Small
OmniPCX Office RCE Large
systems platforms
systems
.
4-23