Alcatel-Lucent OmniPCX Office Installation Manual page 55

- Input impedance : 600 Ohms
- Input level: access + 4.7 dBr or + 15 dBr
4.2.1.7.3 Connecting an Alarm
The alarm is activated in the event of a false stopping of the system.
It is connected via the ALARM output (control contact closed when idle) of the AUDIO
connector.
4.2.1.7.4 Connecting a Broadcast Loudspeaker
Broadcast loudspeakers are connected via the AUDOUT output of the AUDIO
connector.
Audio Output Characteristics:
- Output impedance: < 500 Ohms
- Output level: access + 3 dBr
4.2.1.7.5 Connecting a General Ringer
-IN
-OUT
4-17