Alcatel-Lucent OmniPCX Office Installation Manual page 130

Chapter
4
Interface classification
- UA link: TBTS
- Hub/Alcatel-Lucent 9 series or Alcatel Reflexes 1 to 3 : TBTS
Maximum distances between Alcatel-Lucent OmniPCX Office Communication
Server and sets
- 0,4 mm cable: 325 m
- 0,5 mm cable: 505 m
- 0.6 mm cable: 730 m
Cables of 3 m and 10 m are available for connecting the sets to the hub.
4.12.1.2 Adding/Replacing Boards
Except for
the system is powered up.
To replace a
- Press the ON/OFF button, the RED led will flash.
- Wait for the LED to go to steady red (about 30 seconds): the system is turned off.
With OMC you can save and subsequently restore the configuration after replacing the
PowerCPU
4.12.1.3 Connecting a Hard Disk
4-92
PowerCPU CPU and CoCPU
PowerCPU CPU or a CoCPU
board.
, any board can be plugged/unplugged when
board:
CPU