Alcatel-Lucent OmniPCX Office Installation Manual page 163

6. Follow the Wizard instructions to install the modem. You will need to choose the COM port
that will be associated with the modem.
7. You may need to reboot the PC to complete the installation.
Installing the Driver for an ISDN Modem (example)
The following procedure describes how to install a FRITZ modem.
1. Insert the modem installation CD-ROM.
2. Click the FRITZ ¡X PC Capi driver installer icon The wizard is displayed.
a. Indicate the serial port where the modem will be connected.
b. When the install process is complete, reboot the PC.
3. Insert the modem installation CD-ROM. The wizard is displayed
a. Click the FRITZ ¡32 Communication Software installer icon.
b. Select Install and configure.
c. Use the default installation (click on Next in each Wizard screen).
d. At the end of the Wizard mode, check the Install Capi-port driver box.
4. Select AVM ISDN1 Internet (PPP over ISDN).
5. Reboot the PC.
Using Remote Access With OMC
1. Launch OMC. The OMC Welcome page is displayed.
2. Select the appropriate menu, as follows:
• the Expert menu, if you are logging in as "installer"
• the EasyPlus menu, if you are logging in as "administrator"
• the Easy menu, if you are logging in as "operator" or "attendant"
3. In the toolbar menu, click Comm.
4. Select Connect. The Communication Path window is displayed.
5. Click Modem direct, then OK.
6. Click Dialing and select AWM ISDN1 Internet (PPP over ISDN).
7. Dial the customer phone number and click OK.
8. Type in the appropriate password according to your user mode, as follows:
• Expert: pbxk1064
• EasyPlus: kilo1987
• Easy: help1954
Note:
The PC and B1 lights on the modem should light up when the connection is established.
The configuration session is open.
Remote Access to the ISDN Modem
When an ISDN modem is used, it is necessary to reserve a DDI number in the public
numbering plan to be able to establish remote access.
6-13