Voice Services Available In "Limited" Mode - Alcatel-Lucent OmniPCX Office Installation Manual

Chapter
3
- the CTI Software key for the CTI functions
The software key corresponds to a text file where the name is the CPU hardware number with
the .MSL (MAIN key) or .CSL (CTI key) extension.
Example:
file 000068DA.msl and 000068DA.csl for main CPU no. 000068DA.
Each system needs the Main and CTI Software keys even if no CTI application is used on the
system.
The systems can be delivered with a key that is already personalized for the client. The
Distributor needs to load if necessary the personalized key on the non-factory-configured
systems.
On starting up the system, different cases are possible:
- The functions needed by the customer are open and work properly: the software key
present on the system is correct.
- The functions needed are not open
- The key is valid but some functions are not open (verification done by MMC).
• Verify that the order meets the client's needs. If not, contact the orders" department. A
new software key needs to be created including the new features.
• When loading the key via OMC a warning message is displayed. In this case the
functionalities may be limited due to insufficient memory
power.
- The software key present on the system is not correct:
• The software key syntax is correct but it does not match the CPU's serial number. The
system functions correctly with all its functionalities for 30 days. A message " Software
Key Error " is displayed on the Operator terminal. Press the Alarm key to show the
expiry date. When loading a correct key (valid CPU serial number) during this period,
the system state is normal. If no correct key is loaded after 30 days, the system will
restart in limited state with only sets belonging to the Operator group working, all other
sets being out of service; the "Software key error" is displayed on the operator station.
• The software key syntax is incorrect. The system starts in limited mode. When loading
the correct Software key (with the correct serial number), the system restarts with all
functions working.
• New control starting with R2.0:
•
•
Remark:
For a system in limited mode, when a valid software key is loaded, the system restarts with all its func-
tionalities.
3.2.1

Voice Services Available in "Limited" Mode

3-2
The software key syntax is correct, but the software key does not match the
system's software release. The system functions correctly with all its functionalities
for 30 days.
The software key syntax is correct, the software release is correct but a more
recent key has already been entered on this system and it is not possible to revert
to a previous key. The system functions correctly with all its functionalities for 30
days.
(Hard disk or XMEM) or CPU