Native Instruments Maschine Getting Started Manual page 93

3. You can also set all necessary parameters for a Zone in the Control Area: make sure
the Zone is selected by clicking on it first though.
→ Now you can set the selected Zone's parameters:
▪ Select a root note in the
▪ Set the note range's limits, using the
▪ Set the velocity range, using the
▪ Set the tuning in the
▪ Set the gain in the
▪ Set the panorama position in the
Root field.
Low Note
Low Vel and
Tune field.
Gain field.
Pan field.
and High Note fields.
High Vel fields.
MASCHINE - Getting Started - 93
Sampling
Mapping Samples