Native Instruments Maschine Getting Started Manual page 49

Hide thumbs Also See for Maschine:

Table of Contents

The backside of the MASCHINE controller with the MIDI In.

For details on making Audio and MIDI settings please refer to the printed Setup Guide.

Hardware

Select your Sound by pressing the pad it is assigned to.

Now press and hold the

choose the desired Pad mode. Press Button 2 above the left display to select the Pia-

no Roll/Keyboard mode; then release the

tice that the button stays slightly lit).

If you hit the pads now, you will hear that they all play the same Sound, but with a

different pitch. The pitch scale is divided in halftones, starting with pad 1 as the low-

est note going up to pad 16 as the highest note.

Press the

button, then the

PLAY

In Keyboard mode use Button 7 to transpose the pads down an octave or Button 8 to trans-

pose up an octave.

(Keyboard) button. On the left display, you can

PAD MODE

button, and start to record your melody!

RECORD

Creating Patterns in Keyboard Mode

(Keyboard) button (you will no-

MASCHINE - Getting Started - 49

Creating a Pattern

Table of Contents