Native Instruments Maschine Getting Started Manual page 69

2. Now the right display shows the Modules containing effects. To bypass one of the ef-
fects, press
SHIFT
2), Button 7 (for Module 3) or Button 8 (for Module 4).
3. To hear the effect again, press
Software
1.
Select the Tab where you want to bypass the effect (either SOUND,
clicking on it.
2. Make sure you have the right Sound (click on it on the left of the Grid) or Group (click
on it on the left of the Arranger) in focus. For the Master, select the
3. Now click on the label (orange if it is a Sound, blue if it is a Group, white if it is the
Master) on the left side of the effect Modules to bypass the desired effect. Click the
label again to hear the effect signal.
followed by either Button 5 (for Module 1), Button 6 (for Module
followed by the respective Button (5-8).
SHIFT
Using Effects & Routing
Bypassing Effects
GROUP or MASTER) by
MASTER tab.
MASCHINE - Getting Started - 69